Documenting Process Calibrator
Safety Information
3
• Use only current probes, test leads, and
adapters supplied with the Product.
• Do not touch the probes to a voltage
source when the test leads are
connected to the current terminals.
• Use only cables with correct voltage
ratings.
• Do not use test leads if they are
damaged. Examine the test leads for
damaged insulation, exposed metal, or if
the wear indicator shows. Check test
lead continuity.
• Examine the case before you use the
Product. Look for cracks or missing
plastic. Carefully look at the insulation
around the terminals.
• Always put the stackable end of the test
lead into a terminal of the Product.
To Next Page
Loading...
