Fluke 77/BN - Page 15

Table 2.
To activate Touch Hold:
1. Turn the rotary switch to OFF.
2. While pressing the range push but-
ton, turn the rotary switch to any func-
tion.
3. When the display segments appear
clearly, release the range push button.
TO DEACTIVATE: Turn the rotary
switch to OFF.
TOUCH HOLD
To use Touch Hold:
1. Touch the test leads to the test
points. The meter will take a reading
and beep.
2. Disconnect the test leads from the
test points. The meter will hold the
reading in the display.
3. Read the display.
13