Fluke 77/BN - RANGE HOLD Asien

RANGE HOLD
Range Hold lets you select a fixed
measurement range. The display will
indicate OL if a measurement is too
large to display in the selected range.
If the display indicates OL, select the
next higher range.
10
To enable range hold:
1. Turn the rotary switch to any func-
tion except 300 mV= or +»), and
press the range push button. The meter
will display O.
2. Press the range push button again
to change the range. The meter will
beep once for each change.
To return to autorange:
Press the range button for 1 second.
The meter will beep twice and return to
autorange.