Fluke ProcessMeter 789 User Manual

®
789
ProcessMeter
Users Manual
August 2002 Rev.1, 2/03
© 2002-2003 Fluke Corporation, All rights reserved. Printed in U.S.A.
All product names are trademarks of their respective companies.

Fluke ProcessMeter 789 Specifications

General

Diode test	Yes
Frequency range	0 - 19.999 kHz
AC current range	0 - 1 A
AC voltage range	0 - 1000 V
Resistance range	0 - 40000000 Ω
Resolution (AC voltage)	0.1 mV
Dimensions (WxDxH)	100 x 203 x 50 mm

Weight and Dimensions

Weight	610 g

Summary

Safety Information

General Safety Warnings

Instructions and precautions to prevent electric shock, injury, or damage to the meter.

Measuring Electrical Parameters

Source Mode

Simulate Mode

Using the Current Output Functions

Producing a Steady mA Output

Manually Stepping the mA Output

Auto Ramping the mA Output

Loop Power Supply Mode

Connecting for Loop Power

Replacing the Batteries

Replacing a Fuse

DC and AC Volts Measurement Specifications

DC Volts Measurement Specs

Accuracy and range details for DC voltage measurements.

AC Volts Measurement Specs

Accuracy and range details for AC voltage measurements.

Current and Resistance Measurement Specifications

AC Current Measurement Specs

Accuracy and range details for AC current measurements.

DC Current Measurement Specs

Accuracy and range details for DC current measurements.

Ohms Measurement Specs

Accuracy and range details for resistance (ohms) measurements.

Frequency Counter and General Specifications

Frequency Counter Specs

Accuracy and sensitivity details for frequency counter functions.

General Specifications

Operating conditions, certifications, size, weight, and temperature coefficients.