Need help?Do you have a question about the Fluke 289 and is the answer not in the manual?
General| Product type | Analog multimeter |
|---|---|
| AC current range | 5 - 10 A |
| Continuity check | Yes |
| DC voltage range | 5 - 1000 V |
| Resistance range | 50 - 500 Ω |
| Capacitance range | 1 - 100 nF |
| Resolution (frequency) | 999.99 Hz |
| Resolution (AC current) | 5000 µA |
| Resolution (DC voltage) | 500 mV |
| Temperature measurement range | -20 - 55 °C |
| Dimensions (WxDxH) | 10.2 x 6 x 22.2 mm |
| Battery voltage | 1000 V |
Weight and Dimensions| Weight | 870.9 g |
|---|
Alerts to potentially hazardous voltage, indicating symbols for voltage overload.
Describes how to measure AC voltage, true-rms readings, and accuracy.
Starts a recording session after setting variables like duration and interval.
Terminates a recording session, allowing data saving or viewing.
Procedure to test the meter's internal fuses for continuity.
Provides accuracy specifications for AC voltage measurements across various ranges and frequencies.
Provides accuracy specifications for AC current measurements across various ranges and frequencies.
Provides accuracy specifications for DC voltage measurements across various ranges.
Provides accuracy specifications for DC current measurements across various ranges and frequencies.
Lists accuracy specifications for resistance measurements.
Provides accuracy specifications for temperature measurements.
Lists accuracy specifications for capacitance and diode test functions.
To Next Page
