Need help?Do you have a question about the Fluke 279 FC and is the answer not in the manual?
General| Diode test | Yes |
|---|---|
| Product type | Digital multimeter |
| Product color | Black, Yellow |
| Measuring category | CAT III 1000V, CAT IV 600V |
| Placement supported | Handheld multimeter |
| Power source | Battery |
| Operating altitude | 0 - 2000 m |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating temperature (T-T) | -20 - 50 °C |
| Operating relative humidity (H-H) | 0 - 90 % |
| Display type | LCD |
| Certification | CE, CSA, FCC |
| Display diagonal | 3.5 \ |
| Display resolution | - pixels |
| International Protection (IP) code | IP40 |
| Battery capacity | - mAh |
| Battery recharge time | 4.5 h |
| Infrared spectral band | 7.5 - 14 µm |
| Vertical field of view | 36 ° |
| Horizontal field of view | 27 ° |
| Thermal sensitivity (NETD) | 200 mK |
| Temperature measurement range | -10 - 200 °C |
| Sensor resolution (thermal module) | 102 x 77 pixels |
Weight and Dimensions| Depth | 57.1 mm |
|---|---|
| Width | 93.9 mm |
| Height | 215.9 mm |
| Weight | 793 g |
To Next Page
