Need help?Do you have a question about the Fluke a3000 FC and is the answer not in the manual?
General| Diode test | Yes |
|---|---|
| Product type | Digital multimeter |
| Measuring category | CAT III 1000V, CAT IV 600V |
| Placement supported | Handheld multimeter |
| Battery type | AA |
| Power source | Battery |
| Battery technology | Alkaline |
| Number of batteries supported | 3 |
| Operating altitude | 0 - 2000 m |
| Maximum storage altitude | 12000 m |
| Storage temperature (T-T) | -40 - 60 °C |
| Operating temperature (T-T) | -10 - 50 °C |
| Operating relative humidity (H-H) | 0 - 90 % |
Weight and Dimensions| Depth | 47.5 mm |
|---|---|
| Width | 93 mm |
| Height | 207 mm |
| Weight | 340 g |
Provides contact information for Fluke customer support and services.
Procedure to verify all segments of the product display are functioning correctly.
Instructions for verifying the functionality of the product's backlight.
Procedure to test the functionality of each button on the product's keypad.
Steps for performing an AC current accuracy test using specific equipment.
How to enter the product's maintenance mode for settings and calibration.
Procedure for entering the password to access calibration mode.
Steps to manually restore the default calibration password if lost.
Instructions on how to safely clean the product without causing damage.
Steps for safely replacing the product's batteries.
Lists parts that can be replaced by the user and their part numbers.
To Next Page
