Need help?Do you have a question about the Fluke a3002 FC and is the answer not in the manual?
General| Type | Clamp Meter |
|---|---|
| Category | Multimeter |
| AC/DC Voltage | 600 V AC/DC |
| Temperature Measurement | -40 °C to 400 °C |
| Wireless Range | 20 m |
| Battery Life | 200 hours |
| Operating Temperature | -10 °C to 50 °C |
| Storage Temperature | -20 °C to 60 °C |
| Jaw Opening | 34 mm |
| DC Current Accuracy | 1.5% + 5 |
| Capacitance Measurement | 1000 µF |
| Frequency Range | 10Hz to 1kHz |
| Display | Backlit LCD |
| Wireless Connectivity | Yes |
| Battery Type | AA |
Lists contact information for technical support and service.
Details the steps to check if all segments of the product's display are functional.
Explains how to test the functionality of the product's backlight.
Describes the procedure to verify that all buttons on the product's keypad are working correctly.
Outlines the steps to measure current accuracy using a calibrator.
Explains how to access and use the product's maintenance mode for settings.
Describes the process of entering the password to access calibration mode.
Provides instructions on how to modify the existing product password.
Details the procedure to reset the product's password to the default.
Provides instructions on how to safely clean the product.
Details the steps for replacing the product's batteries.
Lists parts that can be replaced by the user and their corresponding part numbers.
To Next Page
