Need help?Do you have a question about the Fluke 233 and is the answer not in the manual?
Power| maximum voltage between terminal and earth ground | 1000 V rms |
|---|---|
| fuse for A inputs | 11 A, 1000 V 17000A interrupt rating |
| wireless frequency | 2.4 GHz ISM Band 10 meter range |
Operating Environment| operating altitude | 2, 000 meters |
|---|---|
| storage altitude | 12, 000 meters |
| operating temperature | -10 °C to +50 °C |
| storage temperature | -40 °C to +60 °C |
| relative humidity | 90 % at 35 °C, 75 % at 40 °C, 45 % at 50 °C |
Battery| meter base battery type | Three AA Alkaline batteries, NEDA 15A IEC LR6 |
|---|---|
| display module battery type | Two AA Alkaline batteries, NEDA 15A IEC LR6 |
| battery life | 400 hrs typical (Alkaline) |
Contact information for Fluke support and services.
Lists compliance standards and general safety guidelines.
Information on RF data, FCC rules, and interference.
Explains voltage indicators and correct test lead use.
Explanation of icons and readings on the display.
How to use the function switch and select measurement ranges.
List of error codes, sleep mode, and MIN MAX AVG.
Freezing readings and selecting measurement ranges.
Controls for display illumination and startup behavior.
How to measure voltages.
How to measure resistance.
How to measure temperature and check continuity.
Procedures for diode, capacitance, and current measurements.
How to measure frequency.
Using the wireless display module, including separation and docking.
Routine maintenance and battery replacement guide.
Procedures for checking and replacing the meter's fuse.
Lists available spare parts and optional accessories.
Details on operating conditions, altitude, and storage.
Accuracy and ranges for voltage, resistance, continuity, and temperature.
Accuracy and ranges for current, capacitance, and diode tests.
Accuracy for frequency and MIN MAX AVG readings.
Details on meter's input characteristics and protection.
To Next Page
