True-rms Remote Display Digital Multimeter
Maintenance
33
Fuse Test
To do a fuse test:
1. Set the function switch to .
2. Connect a test lead to the jack as shown in
Figure 11.
3. Touch the other end of the test lead to the A jack.
A good fuse will show a resistance of 0.5 Ω or less.
Replace the fuse if the resistance is higher or is
shown.
Good fuse: 0.0 Ω to 0.5 Ω
Replace fuse: OL
gcc105.eps
Figure 11. Fuse Test
To Next Page
Loading...
