October 2009 ©2009 Fluke Corporation. All rights reserved. Specifications are subject to change without notice. 1
233
True-rms Remote Display Digital Multimeter
Calibration Information
Introduction
XWWarning
To avoid electric shock or injury, do not perform the performance tests or
calibration adjustment procedures unless qualified to do so.
The information provided in this document is for the use of qualified personnel
only.
The 233 Calibration Information provides the information necessary to adjust and verify the performance of the
Fluke Model 233 True-rms Remote Display Digital Multimeter (hereafter known as the Meter).
The following information is included in this document:
• Safety Information and International Electrical Symbols (page 2)
• Specifications (page 3)
• Testing the Fuse (page 9)
• Replacing the Fuse and the Battery (page 10)
• Cleaning (page 10)
• Performance Tests (page 11)
• Calibration Adjustment (page 14)
• Replacement Parts and Accessories (page 19)
• Complete Warranty (page 21)
See the 233 Users Manual for complete operating instructions.
Contact Information
To contact Fluke, call one of the following telephone numbers:
USA: 1-888-99-FLUKE (1-888-993-5853)
Canada: 1-800-36-FLUKE (1-800-363-5853)
Europe: +31 402-675-200
Japan: +81-3-3434-0181
Singapore: +65-738-5655
Anywhere in the world: +1-425-446-5500
To register your pro
duct, visit register.fluke.com
To Next Page
Need help?
Power
Operating Environment
Battery
