Fluke 233 - Capacitance Measurements

True-rms Remote Display Digital Multimeter
How to Make Measurements
23
Capacitance Measurements
WCaution
To prevent possible damage to the Meter or
to the equipment under test, disconnect
power and discharge all high-voltage
capacitors before capacitance
measurements. Use the dc voltage function
to make sure that the capacitor is
discharged.
Capacitance ranges are 1000 nF, 10.00 μF, 100.0 μF,
and 9999 μF.
To measure capacitance, set up the Meter as shown in
Figure 5.
+
+
+
+
+
+
+
+
+
Select
Capacitance
gcc104.eps
Figure 5. Capacitance Measurements