Fluke 289 - Understanding the Rotary Switch; Rotary Switch Positions

287/289
Users Manual
10
Understanding the Rotary Switch
Select a primary measurement function by positioning the rotary
switch to one of the icons around its perimeter. For each
function, the Meter presents a standard display for that function
(range, measurement units, and modifiers). Button choices made
in one function do not carry over into another function. The
model 289 offers two additional functions: low ohms (Y) and
low impedance (LoZ) ac volts. Each position shown in Figure 3 is
described in Table 4.
est03.emf
Figure 3. Rotary Switch
Table 4. Rotary Switch Positions
Switch
Position
Function
L
AC voltage measurement using a low input
impedance (model 289 only)
V
AC voltage measurements
T
AC millivolt measurements
U
DC and ac+dc voltage measurements
N
DC millivolts, ac+dc millivolt, and
temperature measurements
S
Resistance, continuity, and conductance
measurements
P
Diode test and capacitance measurements
A
AC, dc and ac+dc amps and milliamps
measurements
X
AC, dc and ac+dc microampere
measurements up to 5,000 μA
Y
Resistance measurements with 50e range
(model 289 only)