Fluke ProcessMeter 789 User Manual

ProcessMeter
Replacement Parts and Accessories
35
If the meter still does not work, contact a Fluke Service
Center. If the meter is under warranty, it will be repaired
or replaced (at Fluke’s option) and returned at no charge.
See the Warranty on the back of the title page for terms.
If the warranty has lapsed, the meter will be repaired and
returned for a fixed fee. Contact a Fluke Service Center
for information and price.
Replacement Parts and Accessories
! Warning
To avoid personal injury or damage to the
meter, use only the specified replacement
fuse, 440 mA 1000 V fast-blow, Fluke PN
943121.
Note
When servicing the meter, use only the
replacement parts specified here.
Replacement parts and some accessories are shown in
Figure 12 and listed in Table 13. Many more DMM
accessories are available from Fluke. For a catalog,
contact the nearest Fluke distributor.
To find out how to order parts or accessories use the
telephone numbers or addresses shown in "Contacting
Fluke".

Fluke ProcessMeter 789 Specifications

General

Diode test	Yes
Frequency range	0 - 19.999 kHz
AC current range	0 - 1 A
AC voltage range	0 - 1000 V
Resistance range	0 - 40000000 Ω
Resolution (AC voltage)	0.1 mV
Dimensions (WxDxH)	100 x 203 x 50 mm

Weight and Dimensions

Weight	610 g