Fluke ProcessMeter 787 - User Manual

®
787
ProcessMeter
Users Manual
April 1997, Rev.3, 12/01
© 1997, 1898, 2000, 2001 Fluke Corporation, All rights reserved. Printed in U.S.A.
All product names are trademarks of their respective companies.

Fluke ProcessMeter 787 Specifications

General

DC Voltage Range	0 to 1000 V
AC Voltage Range	0 to 1000 V
DC Current Range	0 to 20 mA
Resistance Accuracy	0.2% + 1 count
Power Supply	6 AA batteries
Communication Interface	No
Operating Temperature	0 °C to 50 °C
Storage Temperature	-40 °C to 60 °C
Dimensions	100 x 50 mm

Summary

Introduction

Safety Precautions and Warnings

Outlines essential safety warnings and guidelines to prevent injury and damage.

Measuring Electrical Parameters

Measuring Composite Signals

Testing Diodes

Min;Max;Average (MIN MAX) Recording

Using the Current Output Functions

Source Mode Operation

Details how to use the meter to supply current into a circuit.

Simulate Mode Operation

Explains how to simulate a current loop transmitter using an external supply.

Changing the Current Span Setting

Producing a Steady mA Output

Manually Stepping mA Output

Explains how to adjust the mA output in 25% steps using pushbuttons.

Auto Ramping mA Output

Describes how to generate continuous varying current stimuli from the meter.

Battery Life and Management

General Maintenance and Calibration

Replacement Parts and Accessories

Replacing the Battery

Replacing a Fuse

Troubleshooting Meter Issues

Specifications Overview

Measurement Specifications

Diode, Continuity, and Output Specs