Need help?Do you have a question about the Fluke 87 TRUE RMS MULTIMETER and is the answer not in the manual?
General| Temperature | -200°C to 1090°C |
|---|---|
| Safety Rating | CAT III 1000 V, CAT IV 600 V |
| AC Voltage Range | 0.1 mV to 1000 V |
| DC Voltage Range | 0.1 mV to 1000 V |
| Resistance Range | 0.1 Ω to 50 MΩ |
| Temperature Range | -200°C to 1090°C |
| Diode Test | Yes |
| Continuity | Yes |
| True RMS | Yes |
| Display Hold | Yes |
| Min/Max/Avg Recording | Yes |
| Battery Type | 9V |
| Display | LCD with backlight |
| AC Current Range | 0.1 μA to 10 A |
| DC Current Range | 0.1 μA to 10 A |
| Frequency Range | 200 Hz, 2 kHz, 20 kHz, 200 kHz |
Describes the handheld, 4000-count instrument combining digital precision with analog display speed.
Cautionary note about working with voltages above 60V dc or 30V ac rms for user safety.
Warning against applying more than 1000V between any terminal and earth ground.
Details input terminals and explains the beeper alert for incorrect test lead connections.
Explains key measurement functions, pushbuttons, MIN MAX, Manual Ranging, and Display Hold.
Describes Digital/Analog displays, AUTO Autorange, Low Battery, Beeper, and Power-On options.
Covers measuring Voltage, Current, Resistance, Capacitance, Diodes, Frequency, and Duty Cycle.
Covers general maintenance, cleaning, and troubleshooting for moisture-related issues.
Provides a step-by-step guide for replacing the meter's 9V battery.
Critical warning to remove test leads and signals before replacing battery or fuses.
Important note emphasizing the use of specified replacement parts during servicing.
To Next Page
