Need help?Do you have a question about the Fluke 85 and is the answer not in the manual?
General| DC Voltage Range | 0.1 mV to 1000 V |
|---|---|
| AC Voltage Range | 0.1 mV to 750 V |
| Diode Test | Yes |
| Data Hold | Yes |
| Relative Mode | Yes |
| DC Current Range | 0.1 μA to 10 A |
| AC Current Range | 0.1 μA to 10 A |
| Continuity | Yes |
| Display | LCD |
| Battery Type | 9V |
General safety warnings and precautions to be read before using the meter.
Explanation of symbols used on the meter and in the manual for electrical functions.
Warning about applying voltages higher than specified to avoid shock or damage.
Description of input terminals and the Input Alert feature for correct connection.
Overview of how to operate the meter's pushbuttons and their functions.
Explanation of the rotary switch functions and how to select them.
Detailed description of the function and operation of each pushbutton.
How to use the Relative mode to measure differences from a stored reference value.
Operating modes for frequency measurement and duty cycle calculation.
How to select and configure options when turning the meter on.
Explanation of the digital and analog bar graph displays and annunciators.
Instructions for connecting the meter to measure AC and DC voltage.
Description of the meter's holster and its flexible stand features.
Procedures and warnings for measuring AC and DC current in a circuit.
How to use the continuity test function to check circuit connections.
Steps and precautions for performing resistance measurements in a circuit.
How to use the conductance function for testing high resistance or leakage.
Guide to measuring capacitor values and related precautions.
Instructions for performing diode and transistor junction tests.
How to use the Zoom Bar Graph feature for detailed readings and adjustments.
How to use the MIN MAX mode for capturing minimum, maximum, and average readings.
Procedures and considerations for measuring signal frequency.
How to measure the duty cycle of a signal and convert it to pulse width.
Routine cleaning and care instructions for the multimeter.
Step-by-step guide for replacing the meter's 9V battery.
Procedure to test the internal fuses of the multimeter.
Instructions for replacing the multimeter's fuses.
Information on troubleshooting, warranty, and contacting service centers.
Details on minimum sensitivity and trigger levels for frequency counter modes.
Information on safety compliance standards and certifications for the instrument.
To Next Page
