Fluke 77/BN - Page 28

FULL SCALE
SPECIFICATIONS
Table 3. (cont)
BURDEN
FUNCTION RESOLUTION ACCURACY
VOLTAGE
32mA 0.01mA +(2+3)* ;
A(v)
320mA
0.1mA
t(243)
:
10A
0.01A
+(2+3
0.5V
Ar
32mA
0.01mA
+(3+2)
0.2V
45Hz-1kHz
320mA
0.1mA
+(3+2)
2.0V
pical
10A
0.01A
+(3+2
;
* Basic electrical specifications are defined over the temperature range from 20 to 30 degrees C for a period of 36 months after
calibration.
Accuracy is specified as +([% of reading] + [number of units in least significant digits]). In Touch Hold, accuracy is not specified
for 300 mV= and Q functions when test circuit impedance exceeds 1 MQ.
V~ and A œ~ are average responding, calibrated for the rms value of sine waves.
Useful frequency response (typical) for 32V and 320V ranges, -0.5 dB at 10kHz, for 3.2V and 750V ranges, +3 dB at 5 kHZ.
26