Fluke 77 - International Electrical Symbols; Test Lead Alert

Digital Multimeter
International Electrical Symbols
3
International Electrical Symbols
The following international symbols appear in this document, and on the Meter.
Symbols Description Symbols Description
B
AC (Alternating Current)
I
Fuse
F
DC (Direct Current)
P
Conforms to European Union directives
F
B
DC/AC
$
Conforms to relevant Canadian Standards
Association directives
J
Earth ground
T
Double-insulated
W
Important Information; see manual.
X
Hazardous Voltage
b
Battery. (Low battery when shown on
display)
!
Underwriters Laboratories, Inc.
Meter in accordance with IEC 61010-1. 54CJ
s
Inspected and licensed by TÜV
(Technischer Überwachungs Verein)
Product Services
.
;
N10140
Conforms to relevant Australian standards
#
Verband Deutscher Electroniker. German electronics association.
Test Lead Alert
XWWarning
Attempting to make a measurement with a test lead in an incorrect terminal
might blow a fuse, damage the Meter, and cause serious personal injury.
As a reminder to check that the test leads are in the correct terminals, LEAd is momentarily displayed when
the Rotary Switch is moved to
or from the mA or A position.