Fluke 8024B - Page 108

8024B
6-57. DELUXE TEST LEAD SET (Y8134)
6-58. The Y8134 is a deluxe test lead set. The attachments provided allow
interconnection with a wide variety of leads and electronic components. Included in the kit
are:
1. Two test leads (one red and one black). The Y8134 leads have a shrouded
banana connectors on each end.
2. Two test probes
3. Two insulated alligator clips
4. Two spade lugs
5. One squeeze hook
6. One test lead pouch
7. One instruction sheet
6-59. SLIM FLEX TEST LEAD SET (Y8140)
6-60. The Y8140 Test Lead Set (Figure 6-1) consists of one red and one black 60-inch
(1.52 meter) test lead, each with a standard banana plug on one end and an extendable tip
probe on the other end. This flexible metallic tip conductor may be extended up to 2.5
inches and is insulated to within 0.1 inch of its tip. This insulation reduces the chance of
creating an inadvertent short circuit while using the probes in their extended
configuration. Intended primarily for measuring voltages, the Y8140 leads may also be
used for measuring modest currents.