Programming
2A-1.
INTRODUCTION
2A-2. This section documents remote operation
of the
multimeter with any of the following
interface modules
installed:
1.
IEEE-488 Interface
(Option -05)
2. Bit Serial Interface (Option -06)
3. Parallel Interface (Option -07)
2A-3. Basic remote operation
for
8500 series
multimeters is detailed in Table
2A-1. These operating
features are generally compatible with
the
8505A and
8506A multimeters. Table 2A-2 details
additional remote
operating features available
with the 8505A
and 8506A
only.
2A-4. General information,
theory of
operation,
maintenance information,
parts lists,
and schematic
diagrams for each of the
three remote
interfaces
are
presented in Section
6 of
this
manual.
2A-5. Software calibration for each
function
can be
accomplished locally or remotely.
Complete software
calibration information is presented
in Appendix
7B of
this
manual.
To Next Page
Loading...
