Fluke B Series - Page 11

CHANGE 12 - 12784
Rev.-
J, Al7 Power Amplif'ier PCB Assembly (510OA-4080T
On page 5-96:
FROM:
R1241Res, mtl. film, 1.78k +I%, 118W1344366
TO: R1241Res, mtl. film,:2.05k =I%, 1/8W1293,70$
On page 5-97:
Change TOT QTY of ~158, FROM: 1, TO: REF
0~ page 5-98:
Change TOT QTT of R204, FROM: REF, TO: 1
On page 8-35:
Change value of R124, PROH:!.78K, TO: 2.0X
MANGE 13 - 12793
s-.-L
Rev.-
A, Al b Extender Big4 Voltage PCB ASSemDIy 15lUUA-4071T)
Rev.- A, Al6 Extender High Voltage PCB Assembly (5102A-4071T)
Documentation, ohange, does not affectmanual.
CHANGE #Y - 12803
Rev.- B, All Ranging PCB Assembly (5100A-4040T)
On page 5-69:
FROM: 86;Sarew, FHP, Undercut127181718953612718~7i2, 1' :
TO: A6IScrew, FBP, U/CuC1520585~89536152058512
ERRATA #l
On page S-19, para. 3-106:
FROM: For example, a programmed output of 20,V dc orgreater would: ::~
result in Kl and K5 ,energized'and signals Fl, F4A,:and,F4B "'
high; a programmed output of 5 kHz would'reault in K3 and K5
energized,
and signals FYA high.
TO:
For example, a programmed output’ of 2O’J dc ok greater would
result in K2 and K5 energized and signala LF, Fl, F4A, and F4B
high; a programmed output of 5 ktHz,woul.d result in,,K3,and K5
energized,
and,signalc,not'LF,'and FYA high.,,
CHANGE $5 - 12995
Rev.- E, A10 Front Panel, PCB, Assy., Non-Storage (51OOA-40201)'
Dooumentation Change, does not affect manual.
CHABGE t6 - 13050
Rev.- D, Al 5 Digital-to-Analog Converte,r PCB Assy. (5100A-406OT)
Documentation Change, does not affect manual.