Need help?Do you have a question about the Fluke 1738/B and is the answer not in the manual?
General| Brand | Fluke |
|---|---|
| Model | 1738/B |
| Category | Data Loggers |
| Language | English |
Overview of the different electrical parameters measured by the logger.
Instructions for powering the logger using AC mains.
Instructions for powering the logger from the measurement line.
Adjusting screen brightness and controlling display on/off.
Details on accessing and using the Meter mode.
Using the Scope function for waveform analysis.
Analyzing voltage and current harmonics, spectrum, and trends.
Connection diagram for Single Phase system configurations.
Setting up wireless communication with Fluke Connect modules.
Verifying and correcting connection parameters like phase rotation.
Configuring parameters for data logging sessions.
Setting the duration and start/stop times for logging.
Understanding automatic and custom file naming conventions.
Reviewing, deleting, and saving logging sessions.
Reviewing, deleting, and copying screen captures.
Configuring instrument name, language, date/time, and other settings.
Setting the preferred date format.
Setting the logger's time and date.
Procedure for replacing the internal rechargeable battery.
Information on instrument examination and calibration services.
Guidelines for safely cleaning the instrument.
Configuring the logger's WiFi connection.
Using third-party VNC clients for remote control.
Using the Fluke Connect app for mobile device integration.
Overview of the Fluke Connect system for data management.
Information on EMC compliance and standards.
Configuring sensors for wired auxiliary inputs.
Connecting wireless Fluke Connect modules to auxiliary inputs.
To Next Page
