Power Logger
Energy Analyze Plus Software
55
Energy Analyze Plus Software
The companion PC software, Fluke Energy Analyze Plus, is available
at
www.fluke.com. With the software, you can do many tasks from a
computer:
•
Download campaign results for further processing and archiving.
•
Analyze energy or load profiles, including zoom-in and zoom-out
on details.
•
Analyze voltage and current harmonics.
•
Review the voltage and current events that occur during the
campaign.
•
Analyze the RMS profile and wave shapes recorded on events
(1738 or 1736 with 1736/Upgrade license).
•
Review the key power quality parameters.
•
Create a EN 50160 compliance report(1738 or 1736 with
1736/Upgrade license)
•
Perform an IEEE 519 analysis and create a pass/fail report
(requires IEEE 519/Report license).
•
Add comments, annotations, pictures, and other supplementary
information to campaign data.
•
Overlay data from different campaigns to identify and document
changes.
•
Create a report from the analysis you performed.
•
Export measurement results for further processing using a third
party tool.
System Requirements
The computer hardware requirements for the software are:
•
Free Hard Disk space 50 MB, >10 GB (for measurement data)
recommended
•
Installed Memory:
•
1 GB minimum for 32-bit systems
•
≥2 GB recommended for 32-bit systems,
•
≥4 GB recommended for 64-bit systems
•
Monitor, 1280 x 1024 (@4:3) or 1440 x 900 (@16:10), wide-screen
(16:10) at higher resolution recommended
•
USB 2.0 ports
•
Windows 7, Windows 8.x, and Windows 10 (32/64-bit)
Note
Windows 7 Starter edition, Windows 8 RT, and
Windows S Mode are not supported.
To Next Page
Loading...
Need help?
General
