Need help?Do you have a question about the Fluke 1738 and is the answer not in the manual?
General| Product type | Three phase power measurement logger |
|---|---|
| Cable lock slot type | Kensington |
| International Protection (IP) code | IP50 |
| Operating altitude | 0 - 4000 m |
| Non-operating altitude | 0 - 12000 m |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating temperature (T-T) | -10 - 50 °C |
| Operating relative humidity (H-H) | 10 - 95 % |
| Built-in display | Yes |
| Display diagonal | 4.3 \ |
| Touchscreen type | Resistive |
| Display resolution | 480 x 272 pixels |
| Display technology | TFT |
| Efficiency | 68.2 % |
| Battery life | 4 h |
| Charging time | 6 h |
| Battery voltage | 3.7 V |
| Input frequency | 50/60 Hz |
| Battery capacity | 9.25 Wh |
| Power consumption (max) | 50 VA |
| Battery life (power save mode) | 5.5 h |
Weight and Dimensions| Depth | 55 mm |
|---|---|
| Width | 198 mm |
| Height | 167 mm |
| Weight | 1100 g |
| Power adapter weight | 400 g |
| Power supply dimensions (WxDxH) | 130 x 45 x 130 mm |
Explains turning the Logger on/off and using mains, line, or battery power.
Guides on reviewing, deleting, and saving logging sessions to USB.
Details connecting the Logger and confirming study type and wiring for measurements.
Details setting up direct or infrastructure WiFi connections and viewing details.
To Next Page
