Need help?Do you have a question about the Fluke 1750 and is the answer not in the manual?
General| Type | Power Quality Analyzer |
|---|---|
| Frequency Measurement Range | 42.5 Hz to 69 Hz |
| Safety Rating | CAT IV 600 V, CAT III 1000 V |
| Accuracy | ±0.1% of reading |
| Harmonics | Up to 50th harmonic |
| Communication | Ethernet, USB |
| Power Supply | 100 V to 240 V AC |
| Channels | 4 voltage, 4 current |
| Battery Backup | Yes, internal battery |
| Measurement Parameters | Voltage, Current, Power, Harmonics, Flicker |
| Data Logging Interval | 1 second to 60 minutes |
| Battery Life | 45 minutes (UPS) |
| Voltage Measurement Range | 1 to 1000 V (phase to neutral) |
| Operating Temperature | -10 to 50 °C |
Outlines the three main stages of a recording session: Setup, Interim checkup, and End of session.
Explains how to connect voltage leads and current probes to the power network for testing.
Configures essential parameters like clock, network, probes, naming, and capture settings for Recorder operation.
Details adding markers to data and associating external files like images or audio recordings.
Details synchronization, sampling, voltage/current ranges, and measurement accuracy.
Specifies accuracy and parameters for sag, swell, interruption, power, PF, and harmonic measurements.
Details operating conditions, voltage ratings, enclosure protection, EMC, and safety conformance.
To Next Page
