Fluke 1750 User Manual

1750
Operators Manual
26
Navigating in Power View on the PDA
The Menu Bar on the bottom of the Power View screen allows you to quickly and easily
configure a Recorder, view live data, and transfer data to the Secure Data (SD) card for
viewing and analysis on your desktop computer using the companion Power Analyze
software.
Power View Menus
Live
Brings up a list of the live detail views: Scope, Meter, Phasor, Harmonics, and Trend.
There are configurable detail views of each type of screen available by tapping the sector
of interest or the Live menu. Once a detail view is selected, navigation to all available
detail views is accomplished using the Live menu.
Menu
Brings up the Data memory management screens which are for download to the SD card
inserted in the Recorder and for erasing Recorder internal memory and erasing SD card
files.
1750 Setup
Brings up the setup screen that allows you to configure the Recorder and set recording
period information. Using this function, you can tap the appropriate icon to set the
following:
• Clock
• Probe Detect
• IP Address
• Measurement Description
• Nominal Power
• Phase Swap
• Volts/Current Ratio
• Recorder Name/Password
• Snapshot Period
• Language

Fluke 1750 Specifications

General

Type	Power Quality Analyzer
Frequency Measurement Range	42.5 Hz to 69 Hz
Safety Rating	CAT IV 600 V, CAT III 1000 V
Accuracy	±0.1% of reading
Harmonics	Up to 50th harmonic
Communication	Ethernet, USB
Power Supply	100 V to 240 V AC
Channels	4 voltage, 4 current
Battery Backup	Yes, internal battery
Measurement Parameters	Voltage, Current, Power, Harmonics, Flicker
Data Logging Interval	1 second to 60 minutes
Battery Life	45 minutes (UPS)
Voltage Measurement Range	1 to 1000 V (phase to neutral)
Operating Temperature	-10 to 50 °C