Power Recorder
Safety Information
3
Safety Information
See the Specifications section for a full agency compliance list. Table 1 lists symbols that
appear on the Recorder and in this manual.
XW Warning
To prevent possible electrical shock, fire, or personal injury:
• Carefully read all instructions.
• Do not work alone.
• Do not use the Product around explosive gas, vapor, or in
damp or wet environments.
• Use only insulated current probes, test leads, and adapters
as supplied with the Product.
• Examine the case before you use the Product. Look for
cracks or missing plastic. Carefully look at the insulation
around the terminals.
• Remove all probes, test leads, and accessories that are not
necessary for the measurement.
• Make sure the ground conductor in the mains power cord
is connected to a protective earth ground. Disruption of the
protective earth could put voltage on the chassis that could
cause death.
• Only use probes, test leads, and accessories that have the
same measurement category, voltage, and amperage
ratings as the product.
• Do not use exposed metal BNC or banana plug connectors.
• Do not put metal objects into connectors.
• Do not operate the Product with covers removed or the
case open. Hazardous voltage exposure is possible.
• There are no user-replaceable parts in the Product. Have
an approved technician repair the Product.
• Use the Product only as specified, or the protection
supplied by the Product can be compromised.
To Next Page
Loading...
Need help?
General
