Fluke 1750 User Manual

1750
Operators Manual
48
file into the synchronization folder on your PDA, so that it will be automatically
transferred into the sync folder on the PC the next time you dock the PDA.
Turn off the Recorder
The Recorder always has the UPS enabled to allow a 5-minute pass through time on a
voltage interruption. When you pack the Recorder for transport, you have the option to
shut down the Recorder and disable the UPS before unplugging the power cord.
To turn off the Recorder:
1. Select Menu>Tools>1750 Shut down...
2. Confirm the warning message.
3. Wait until the Power LED is solid green.
The power cord can be safely unplugged.
azd143.bmp
Cleaning and Maintenance
The Recorder contains no user serviceable parts. Contact an Authorized Fluke Service Center
for repair. Periodically wipe the case with a damp cloth and mild detergent. Do not use
abrasives or solvents.

Fluke 1750 Specifications

General

Type	Power Quality Analyzer
Frequency Measurement Range	42.5 Hz to 69 Hz
Safety Rating	CAT IV 600 V, CAT III 1000 V
Accuracy	±0.1% of reading
Harmonics	Up to 50th harmonic
Communication	Ethernet, USB
Power Supply	100 V to 240 V AC
Channels	4 voltage, 4 current
Battery Backup	Yes, internal battery
Measurement Parameters	Voltage, Current, Power, Harmonics, Flicker
Data Logging Interval	1 second to 60 minutes
Battery Life	45 minutes (UPS)
Voltage Measurement Range	1 to 1000 V (phase to neutral)
Operating Temperature	-10 to 50 °C