Need help?Do you have a question about the Fluke 1750 and is the answer not in the manual?
General| Type | Power Quality Analyzer |
|---|---|
| Frequency Measurement Range | 42.5 Hz to 69 Hz |
| Safety Rating | CAT IV 600 V, CAT III 1000 V |
| Accuracy | ±0.1% of reading |
| Harmonics | Up to 50th harmonic |
| Communication | Ethernet, USB |
| Power Supply | 100 V to 240 V AC |
| Channels | 4 voltage, 4 current |
| Battery Backup | Yes, internal battery |
| Measurement Parameters | Voltage, Current, Power, Harmonics, Flicker |
| Data Logging Interval | 1 second to 60 minutes |
| Battery Life | 45 minutes (UPS) |
| Voltage Measurement Range | 1 to 1000 V (phase to neutral) |
| Operating Temperature | -10 to 50 °C |
To Next Page
