Need help?Do you have a question about the Fluke DATAPAQ XDL12 and is the answer not in the manual?
General| Number of Channels | 12 |
|---|---|
| Resolution | 0.1 °C |
| Thermocouple Type | Type K, T, J, N, E, R, S |
| Weight | 300 g |
| Communication Interface | USB |
| Software Compatibility | Datapaq Insight |
Details technical specifications like dimensions, weight, thermocouple types, operating ranges, protection ratings, and sample intervals.
Explains the logger's physical buttons for control and the status LEDs indicating battery and operational state.
Covers battery types, life, charging procedures, and essential battery care advice.
Guides on optimal logger usage, temperature stabilization, thermocouple connection, and general operational tips.
Outlines the recommended procedures for testing and calibrating the logger to ensure accuracy and compliance.
Covers computer specifications, software installation, and establishing communication between logger and PC.
Details setting sample intervals, trigger modes, and resetting the logger for new data collection runs.
Explains how to download acquired data, apply process files, and save results for analysis.
Describes running profiles in real-time via telemetry, including setup, display customization, and data viewing.
Guides on pausing, resuming, and ending telemetry sessions, and saving the collected data.
Addresses common problems with logger communication, download failures, and error messages.
Covers checking data for errors, using logger diagnostics for probe testing, and identifying issues like open/short circuits.
Provides contact information for the Datapaq Service Department for unresolved technical issues.
To Next Page
