Fluke 1738 User Manual

1736/1738
Users Manual
56
Energy Analyze Plus Software
The Power Logger includes the Fluke Energy Analyze Plus
software that lets you do tasks from a computer.
You can:
• Download campaign results for further processing and
archiving.
• Analyze energy or load profiles, including zoom-in and
zoom-out on details.
• Analyze voltage and current harmonics.
• Review the voltage and current events that occur
during the campaign.
• Analyze the RMS profile and wave shapes recorded
on events (1738 or 1736 with 1736/Upgrade license).
• Review the key power quality parameters.
• Create a EN 50160 compliance report (1738 or 1736
with 1736/Upgrade license)
• Perform an IEEE 519 analysis and create a pass/fail
report (requires IEEE 519/Report license).
• Add comments, annotations, pictures, and other
supplementary information to campaign data.
• Overlay data from different campaigns to identify and
document changes.
• Create a report from the analysis you performed.
• Export measurement results for further processing
using a third party tool.
System Requirements
The computer hardware requirements for the Energy
Analyze software are:
• Free Hard Disk space 50 MB,
>10 GB (for measurement data) recommended
• Installed Memory:
- 1 GB minimum for 32-bit systems
- ≥2 GB recommended for 32-bit systems,
≥4 GB recommended for 64-bit systems
• Monitor, 1280 x 1024 (@4:3) or 1440 x 900 (@16:10),
wide-screen (16:10) at higher resolution recommended
• USB 2.0 ports
• Windows 7, Windows 8.x, and Windows 10 (32/64-bit)
Note
Windows 7 Starter edition and Windows 8 RT are
not supported.

Fluke 1738 Specifications

General

Product type	Three phase power measurement logger
Cable lock slot type	Kensington
International Protection (IP) code	IP50
Operating altitude	0 - 4000 m
Non-operating altitude	0 - 12000 m
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Built-in display	Yes
Display diagonal	4.3 \
Touchscreen type	Resistive
Display resolution	480 x 272 pixels
Display technology	TFT
Efficiency	68.2 %
Battery life	4 h
Charging time	6 h
Battery voltage	3.7 V
Input frequency	50/60 Hz
Battery capacity	9.25 Wh
Power consumption (max)	50 VA
Battery life (power save mode)	5.5 h

Weight and Dimensions

Depth	55 mm
Width	198 mm
Height	167 mm
Weight	1100 g
Power adapter weight	400 g
Power supply dimensions (WxDxH)	130 x 45 x 130 mm