1736/1738
Users Manual
52
Maintenance
If the Logger is used appropriately it does not require special
maintenance. Maintenance should only be done at a company related
service center by trained and qualified personnel within the guarantee
period. See
www.fluke.com for locations and contact information of
Fluke Service Centers worldwide.
XW Warning
To prevent possible electrical shock, fire, or personal
injury:
•
Do not operate the Product with covers removed or the
case open. Hazardous voltage exposure is possible.
•
Remove the input signals before you clean the
Product.
•
Use only specified replacement parts.
•
Have an approved technician repair the Product.
How to Clean
W Caution
To avoid damage, do not use abrasives or solvents on
this instrument.
If the Logger is dirty, clean it carefully with a damp cloth (without
cleaning agents). Mild soap may be used.
Battery Replacement
The Logger has an internal rechargeable Lithium-ion battery.
To replace the battery:
1.
Remove the Power Supply.
2.
Unscrew the four screws and remove the battery door.
3.
Replace the battery.
4.
Fasten the battery door.
W Caution
To prevent damage to the Product, use only original
Fluke batteries.
Calibration
As an additional service Fluke offers the regular examination and
calibration of your Logger. The recommended calibration cycle is
2 years. For more information see How to Contact Fluke on page 2.
To Next Page
Loading...
Need help?
General
