CPS-40M-HC40/CPS-100M
Instructions
2
How to Contact Fluke Calibration
To contact Fluke Calibration, call one of the following telephone numbers:
• Technical Support USA: 1-877-355-3225
• Calibration/Repair USA: 1-877-355-3225
• Canada: 1-800-36-FLUKE (1-800-363-5853)
• Europe: +31-40-2675-200
• Japan: +81-3-6714-3114
• Singapore: +65-6799-5566
• China: +86-400-810-3435
• Brazil: +55-11-3759-7600
• Anywhere in the world: +1-425-446-6110
To see product information and download the latest manual supplements, visit Fluke Calibration’s website at
www.flukecal.com.
To register your product, visit http://flukecal.com/register-product.
Safety Information
A Warning identifies conditions and procedures that are dangerous to the user. A Caution identifies
conditions and procedures that can cause damage to the Product or the equipment under test.
WWarning
To prevent personal injury:
• Read all safety information before you use the Product.
• Wear eye protection.
• Do not use with flammable or combustible liquids.
• Use the Product only as specified, or the protection supplied by the Product can
be compromised.
• Carefully read all instructions.
• Do not use the Product if it operates incorrectly.
• Do not use the product if it is altered or damaged.
• Disable the Product if it is damaged.
• Do not attempt to operate the Product above its rated pressure.
• Do not disconnect tubing when the system is pressurized.
W Caution
To avoid damage to the Product, carefully follow the cleaning and decontamination
instructions in the manual. Do not use unapproved solvents or cleaners on the Product.
To Next Page
Loading...
