Fluke CPS-40M-HC40 - Page 3

Contamination Prevention System
High-Pressure Contamination Prevention System
Symbols
3
Symbols
The symbols shown in Table 1 are found in these instructions or on the Product.
Table 1. Symbols
Box Contents
The Product is either of these kits:
CPS-40M:
• CPS-40M-HC40 Test Station
• Pressure Hose, JIC #4 (AN4) fittings
• Pressure Hose Adapter Fittings, JIC #4 (AN4):
1/4 NPT; 1/4 BSP; 7/16-20 (x2)
• Vacuum Hose, 3/8 inch polyethylene
• Vacuum Hose Adapter Fittings, 3/8 tube:
1/4 NPT; 1/4 BSP; 7/16-20 (x2)
• PK-ADPTR-HC40 Adapter Set
• CPS Cable
• Instructions
CPS-100M:
• CPS-100M Test System
• High-Pressure Hose, DH500 Fittings (cone
and threaded connection compatible with
Autoclave F250C and HIP HF4)
• CPS Cable
• Instructions
Symbol Definition
W WARNING, RISK OF DANGER.
 Consult user documentation.
) Certified by CSA Group to North American safety standards.
P Conforms to European Union directives.
 Conforms to relevant Australian Safety and EMC standards.

This product complies with WEEE Directive marking requirements. The affixed label indicates that
you must not discard this electrical/electronic product in domestic household waste. Product
Category: With reference to the equipment types in the WEEE directive Annex I, this product is
classed as category 9 “Monitoring and Control Instrumentation” product. Do not dispose of this
product as unsorted municipal waste.