Fluke DSP-100 - Page 182

DSP-100/2000
Users Manual
C-4
Table C-1. Tests Run per Test Standard During an Autotest (continued)
Test Standard
1
Wire Map Resistance
2
Length Impedance NEXT
Coax Cables ■■■
IEEE 10BaseT ■ 2 pair ■❒■ 5-10 MHz
100BaseTX ■ 2 pair ■■■ 1-80 MHz
100BaseT4 ■ 4 pair ■■■ 12.5 MHz
IEEE 802.12 4-UTP ■ 4 pair ■■■ 1-15 MHz
IEEE 802.12 STP ■ 2 pair ■■■■ 1-100 MHz
TokenRing, 4 Mb/s ■ 2 pair ■■4 MHz
TokenRing, 16 Mb/s, Passive ■ 2 pair ■■ 16 MHz
TokenRing, 16 Mb/s, Active ■ 2 pair ■■ 16 MHz
TP-PMD ■ 2 pair ■■■ 1-80 MHz
Twin-Ax: RJ45 pins 4,5,S ■ 1 pair ■■
ARCnet ■■■
Aus/NZ Class C Channel ■ 4 pair ■ ❒■ 1-16 MHz
Aus/NZ Class D Channel ■ 4 pair ■ ❒■ 1-100 MHz
Aus/NZ Class C Basic Link ■ 4 pair ■ ❒■ 1-16 MHz
Aus/NZ Class D Basic Link ■ 4 pair ■ ❒■ 1-100 MHz
All Tests ■ 4 pair ■■❒■ 1-100 MHz