EasyManua.ls Logo

Fluke LinkIQ User Manual

Fluke LinkIQ
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
LinkIQ™
Cable+Network Tester
Users Manual
2/2021, Rev. 1, 1/2022 (English)
©2021-2022 Fluke Corporation. All rights reserved.
Specifications are subject to change without notice.
All product names are trademarks of their respective companies.
Question and Answer IconNeed help?

Do you have a question about the Fluke LinkIQ and is the answer not in the manual?

Fluke LinkIQ Specifications

General IconGeneral
Product typePoE tester
Product colorGrey, Yellow
Built-in displayYes
Maximum cable length300 m
Supported connectorsRJ-45
Storage temperature (T-T)-10 - 60 °C
Operating temperature (T-T)0 - 45 °C
Charging time270 min
Battery voltage3.6 V
Battery capacity6400 mAh
Weight and Dimensions IconWeight and Dimensions
Weight624 g

Summary

Limited Warranty and Liability

Introduction to LinkIQ

Automatic Test Discovery

The automatic test discovery feature recognizes a connected device and selects the appropriate test type.

Product Information and Safety

Contact Fluke

Information on how to contact Fluke for support and product registration.

Safety Information

General safety guidelines and warnings for using the product.

Product Familiarization

Product Parts

Lists and describes the components and accessories included with the product.

Controls and Connections

Details the physical controls and connection ports on the product.

Hang Strap Attachment

Figure 1 shows how to attach the hang strap to the product.

Product Display Overview

Table 3 shows the items displayed on the product's screen.

Menu Navigation and Settings

Main Menu and Controls

Instructions on how to navigate menus and change settings using on-screen controls.

Settings Menu Options

Configure wire map, cable, general, network, ping, and other product settings.

Configure Static IP Address

Steps to configure IPv4 or IPv6 addresses, including changing product and ping target IPs.

Tools and Cable Testing

Tools Menu Functions

Use tone generator to locate cables and blink port lights to verify connectivity.

Before a Test Safety

Warnings to prevent electrical shock, fire, personal injury, or damage during testing.

Performing Cable Tests

Steps to perform a cable test, including setup and initiation.

Cable Test Results and Failures

Interpreting cable test results, including pass/fail, wire maps, and specific failure types.

Network and PoE Testing

Switch and Connectivity Tests

Perform switch connectivity, ping, and PoE tests to gather network and power information.

Executing a Switch Test

Steps to perform a switch test, including setup and initiation.

Switch and Ping Test Results

Interpreting switch test results, including port speed, advertised speeds, and ping details.

PoE Test Results Analysis

Explains examples of successful PoE tests and common reasons for failures.

Test Result Management

Save Test Results

Steps to save completed test results with optional ID and project name.

Results Menu and Deletion

Instructions on how to view, manage, and delete saved test results.

Upload Results to PC

Maintenance and Specifications

Product Cleaning

Instructions for cleaning the product's case, display, and ports safely.

Battery Information and Warnings

Important warnings and information related to the product's battery.

Product Specifications Access

Guidance on how to access complete product specifications online.

Related product manuals