EasyManua.ls Logo

Fluke LinkIQ - Switch Test Detail Results; Ping Test Results

Fluke LinkIQ
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cable+Network Tester
Switch Test Results
29
Switch Test Detail Results
Ta b l e 1 2 shows possible detail results of a switch test. When an item is not configured with a
name or description, -- shows.
Ping Test Results
The Product pings a user-defined IP address, DNS server, and gateway 4 times.
With a successful test, the Product shows the IP address of each device and the response time
in milliseconds (ms) from each ping shows in the results.
If a ping attempt fails, shows instead of a time value.
If one or more ping attempt fails, an error message shows with a description of the problem of
the first ping attempt that fails.
Ta b l e 1 3 shows possible results of a ping test.
Table 12. Switch Test Detail Results
Name Description
Switch Name The name of the nearest switch
Switch Description The description of the nearest switch
Port ID The port number of the switch that the Product is connected to
Port Description The description of the port
VLAN The VLAN that is configured on the switch port
VLAN Name The name assigned to the VLAN
IP Address A list of IP addresses reported by the switch
MAC Address The MAC address of the switch
Protocol
The discovery protocols used by the switch protocols show.
There may be a combination of LLDP, CDPv1, or CDPv2.

Related product manuals