LinkIQ
Users Manual
2
Switch test if the Product detects a network device. See Switch Tests.
Switch test with Ping test with Ping enabled and the Product detects a network device.
See Switch Tests.
Switch test with Power over Ethernet (PoE) with PoE enabled and the Product detects a
Power Sourcing Equipment (PSE) device. See Switch Tests.
Contact Fluke
Fluke Corporation operates worldwide. For local contact information, go to our website:
www.flukenetworks.com
.
To register your product, or to view, print, or download the latest manual or manual
supplement, go to our website.
+1-425-446-5500 info@flukenetworks.com
Safety Information
General Safety Information is in the printed Safety Information document that ships with the
Product and at www.flukenetworks.com
. More specific safety information is listed where
applicable.
A Warning identifies hazardous conditions and procedures that are dangerous to the user. A
Caution identifies conditions and procedures that can cause damage to the Product or the
equipment under test.
Note
Before you use the Product for the first time, charge the battery for a minimum of
1.5 hours. See Battery.
Caution
To activate the input protection circuitry of the Product, turn on the Product
before you connect a cable to the Product. To turn on the Product, push
O.
Fluke Corporation
P.O. Box 9090
Everett WA 98206-9090
U.S.A.
Fluke Europe B.V.
P.O. Box 1186
5602 BD Eindhoven
The Netherlands
To Next Page
Loading...
