i3000/i2000 English Instruction Sheet
Page 2
• Protect the probe against water and humidity.
• Wear protective clothing and gloves as
required.
• Do not install this product on live conductors.
Always de-energize the circuit under test before
installing the flexible measuring head.
• Always inspect the electronics unit, connecting
cable, and flexible measuring head for damage
before using the Probe.
• Do not use the Probe if damaged.
• Always connect Probe to display device before
installing the flexible measuring head.
• Never change batteries while measurement
head is installed on conductor.
• Use only the provided original or specified
accessories.
• Use the Current Probe only as specified in the
operating instructions; otherwise the current
probe’s safety features may not protect you.
• Adhere to local and national safety codes.
Individual protective equipment must be used
to prevent shock and arc blast injury where
hazardous live conductors are exposed.
• CAT III equipment is designed to protect against
the transients in the equipment in fixed
equipment installations, such as distribution
panels, feeders and short branch circuits, and
the lighting systems in large buildings.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
To Next Page
Loading...
Need help?
General
