i3000/i2000 English Instruction Sheet
Page 5
Safety Standards
General IEC 61010-1 Pollution Degree 2
Measurement IEC 61010-2-032, CAT III 600 V
Electromagnetic Compatibility (EMC)
IEC 61326-1 Portable Electromagnetic Environment,
IEC 61326-2-2
CISPR 11: Group 1, Class A
Group 1: Equipment has intentionally generated and/or uses
conductively-coupled radio frequency energy that is necessary for
the internal function of the equipment itself.
Class A: Equipment is suitable for use in all establishments other
than domestic and those directly connected to a low-voltage power
supply network that supplies buildings used for domestic purposes.
There may be potential difficulties in ensuring electromagnetic
compatibility in other environments due to conducted and radiated
disturbances.
Caution: This equipment is not intended for use in residential
environments and may not provide adequate protection to radio
reception in such environments.
Dimensions 116 (l) x 68.5 (w) x 30 (d) mm
4.57 (l) x 2.71 (w) x 1.18 (d) in
Measuring Head Characteristics
Cable length
i2000, i3000s 24 Flex
610 mm (24 in), double
insulated
i3000s 36 Flex 915 mm (36 in), double
insulated
Cable diameter 14.3 mm (0.562 in)
Bend radius 38.1 mm (1.5 in)
Output cable 2 m long (78.7 in)
Coupling diameter 22.2 mm (0.875 in)
Material TPE rubber,
Polypropylene, UL94-VO
rated
Operating temperature -20 °C to +90 °C
(-4 °F to +194 °F)
Storage temperature -40 °C to +105 °C
(-40 °F to +221 °F)
Maximum relative
humidity
85 %
Weight 0.18 kg (0.4 Ib)
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
To Next Page
Loading...
Need help?
General
