i3000/i2000 English Instruction Sheet
Page 8
2. Wrap the flexible measuring head around the conductor to
be tested in a close coupling manner.
3. Energize the circuit under test.
4. For most accurate measurement, centre the flexible head
around the conductor.
5. Locate coupling away from the nearby conductors.
Warning
To prevent electric shock or personal injury:
• Do not use the flexible current probe to
measure bare conductors unless wearing
protective clothing suitable for high voltage
work.
• Always use appropriate equipment for personal
protection. When installed on bare
conductors/busbars, the product must be within
a suitable enclosure.
Ieb0001.eps
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
To Next Page
Loading...
