EasyManua.ls Logo

Fluke NX1 Pocket Toner - Electrical Safety Limits; Environmental and Usage Precautions

Fluke NX1 Pocket Toner
9 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Warning
To prevent possible fire, electric shock, or
personal injury:
Do not connect the toner to more than 30
Vac, 42 Vpk, or 60 Vdc.
This equipment has no insulation against
on-hook, dial tone, ring, or transient
voltages. Those voltages can be
hazardous and can exist on active
telecommunication circuits. Do not use
this equipment on active circuits where
these voltages can exist. Disconnect the
circuits at the source before connecting
this equipment.
Do not use in a wet or damp
environment.
If this product is used in a manner not
specified by the manufacturer, the
protection provided by the product may
be impaired.
Do not connect this equipment to
public communications networks,
such as telephone systems. See the
warning below.
Do not put products that contain
circuit boards into waste containers.
Refer to local regulations for disposal
procedures.

Related product manuals