Fluke NX2 User Manual

WSafety Information
WWarning
X
To prevent possible fire, electric shock, or
personal injury:
 Do not connect the toner to more than
30 Vac, 42 Vpk, or 60 Vdc.
 This equipment has no insulation against
on-hook, dial tone, ring, or transient volt-
ages. Those voltages can be hazardous
and can exist on active telecommunica-
tion circuits. Do not use this equipment on
active circuits where these voltages can
exist. Disconnect the circuits at the source
before connecting this equipment.
 Do not use if wet or damp.
 Protection may be impaired if product is
used in a manner not specified.
P
Conformite Europeene. Conforms to
the requirements of the European
Union and the European Free Trade
Association (EFTA).
)
Listed by the Canadian Standards
Association, CSA C22.2 No. 61010.1.04
j
Do not connect this equipment to
public communications networks, such
as telephone systems. See the warning
below.
~
Do not put products that contain circuit
boards into waste containers. Refer to
local regulations for disposal
procedures.

Fluke NX2 Specifications

General

Brand	Fluke
Model	NX2
Category	Test Equipment
Language	English