Need help?Do you have a question about the Fluval FX4 and is the answer not in the manual?
General| Wattage | 30 W |
|---|---|
| Media Baskets | 3 |
| Number of Filter Baskets | 3 |
| Hose Diameter | 1 inch |
| Filter Type | Canister Filter |
| Aquarium Capacity | Up to 1000 L (265 US Gal) |
| Filter Media Capacity | 1.5 US Gal (5.9 L) |
| Pump Output | 2650 L/h (700 US Gal/h) |
| Dimensions | 40 x 40 x 42 cm (15.75 x 15.75 x 16.5 in) |
Prepare for filter setup by topping off water and gathering tools.
Verify all components using the manual's diagrams.
Decide filter placement, adhering to installation requirements for optimal gravity-fed system function.
Connect hosing to the intake valve, measure, cut, and position the intake tube.
Connect hosing to the output valve, measure, cut, and position the output nozzle.
Disassemble, clean, and re-stack media baskets, then add water to the canister.
Connect intake and output valves to the filter lid, ensuring they click securely.
Attach utility hosing to the valve for draining and water changes.
Check installation, ensure submersion, and verify water levels before turning on.
Details specifications for Fluval FX4 and FX6 filters, including capacity and output.
Schedule for checking, cleaning, and replacing filter components.
Guidance on gravel cleaning and water changing using filter features.
Steps for draining, disassembling, and cleaning filter media and components.
Instructions for removing, cleaning, and reassembling the FX4 filter pump unit.
Instructions for removing, cleaning, and reassembling the FX6 filter pump unit.
Steps to reassemble filter baskets, lid, and valves after maintenance.
To Next Page
