Flycam Zest Pro - Weight Bar and Head Plate Assembly

6
 Insert the weight rods onto the stabilizer
& ghten the knobs accurately.
 Now aach provided Weight Plates at
both sides on Stabilizer rods and ghten
the knobs to secure them appropriately.
 Aach V-Mount Baery Plate onto
Stabilizer Rods and ghten the provided
knob to secure it properly.
Assembly of Weight Bar
Assembly of Head Plate
 Remove the bolt aached to the camera
plate with the help of a 3/16 mm Allen
key.
 Aer removing the bolt, you can use a
ratchet knob in its place.
Once the ratchet knob is aached,
ghten it correctly.