10
Step 3: Adjust handlebar stem
Your Flyer™ eBike’s handlebar stem is designed to be adjusted for optimal comfort.
A. Using the provided 5mm allen wrench, loosen the bolt.
B. Rotate the stem to your preferred height
C. Re-tighten the bolt to 16 Nm using a torque wrench with 5mm hex bit.
A
B
C
WARNING! Overtightening the stem bolt can damage the handlebar stem assembly which
can lead to risk of injury. To avoid overtightening, use a torque wrench and tighten to 16 Nm.
To Next Page
Loading...
