7.4. Mast Setting
We recommend that you perform the first mast setting with three people
1. Check all the connections before setting the mast.
2. Fully unscrew the three chainplates.
3. Enter the mast foot in the mast ball with a 90 ° angle.
4. Raise the mast.
5. Then hang the bridle to the bigger chainplates on the hulls
7.5. Mast Rotator
1. Take the Big box packs / mast / mast rotator and Mast assy rotator.
2. Set the mast rotator M2901.
3. Connect the rotator to the Rotator control rope M2903
To Next Page
Loading...