8. Bowsprit
1. Use the packs Big box/Bowsprit assy and assy Bowsprit (cf plan next page).
2. Push the bowsprit lugs in the front beam.
3. Attach the front flanges TG1309 to the hull with the corresponding shackles (in Big box Rigging).
4. Do the same with the inner flanges TG1104 without stretching them.
5. Fix the bowsprit to the tube of the forestay through the screw eye DIN944.
6. Fix the forestay tube to the forestay unscrewing the nut.
7. Adjust the front flanges so that the bowsprit is straight.
8. Fix the shackle on the forestay tube.
9. Stretch the middle flanges thanks to the adjustable splice.
10. Pass the jib free sheet PA1602 through pulley HK404 of the bowsprit and attach the free jib rope
to the jib fixed rope PA1601.
To Next Page
Loading...