Flying Voice FIP10 - Conference Calls

Call Features
Flyingvoice Network Technology Co., Ltd. 16
Topics
Rejecting Calls with DND
Deactivating DND
Rejecting Calls with DND
Procedure
1. Navigate to Menu > Features > DND.
2. Select Enable from the DND Status field.
3. Select Save.
The DND icon appears in the status bar.
Tip: To activate or deactivate DND quickly, press the DND soft key when the phone is idle.
Deactivating DND
You can deactivate DND when you are ready to resume receiving calls again.
Procedure
1. Navigate to Menu > Features > DND.
2. Select Disable from the DND Status field.
3. Select Save.
The DND icon disappears from the status bar.
Tip: To deactivate DND quickly, press the DND soft key when the phone is idle.
Ending Calls
You can end the current call at any time.
Procedure
1. Do one of the following:
⚫ If you are using the handset, press the Cancel key or hang up the handset.
⚫ If you are using the headset, press the Cancel key.
⚫ If you are using the speakerphone, press the Cancel key, Speakerphone key .
Muting/Unmuting Audio
When you are in a call, you can mute the audio, so that you can hear the other person, but
they cannot hear you.
Procedure
1. Press the MUTE key during a call.
2. Press the MUTE key again to unmute the call.
Holding and Resuming Calls
You can place an active call on hold and resume the call when you are ready. When you place
a call on hold, the held party may hear the music played by its sever.
Topics